by ETI Staff | Jun 2, 2021 | Frequently Asked Questions, TRACON
TRACON FAQ’S – FPT-130 CAN THE UNIT INTERFACE WITH BMS? CAN IT COMMUNICATE WITH BACNET OR MODBUS? No, the FPT 130 provides a summary alarm via a dry contact relay. This relay is energized whenever the unit is powered. So, with power off the NC contact is...
by ETI Staff | Mar 19, 2021 | NETCOM, News, Snow Switch, TRACON
Why the change? In an effort to become more streamlined and to do our part for the environment, ETI is moving to a paperless system for all of our product Data Sheets, Installation Guides and Manuals. Moving forward, all of our product lines; Snow Switch, Tracon and...
by ETI Staff | Feb 9, 2021 | Featured, TRACON
Heat Trace with Plastic Pipes Heat cable can be used on plastic pipes but the plastic’s durability and thermal properties must be considered. Plastic has approximately 125 times the thermal resistance than steel but is also more susceptible to damage from direct high...
by ETI Staff | Oct 29, 2020 | Frequently Asked Questions, GPT 130 FAQs, News, TRACON
Temperature Controller – GPT-130 QUESTION – WHY AM I GETTING A GROUND FAULT WHEN THE GROUND FAULT CURRENT IS SO LOW? ANSWER – The GPT-130 displays a number of alarms, beside the ground...
by ETI Staff | Jun 26, 2020 | Controller, snow melting management, Snow Switch, TRACON
From coast-to-coast and station-to-station, ETI’s line of products keeps the wheels of commerce rolling by holding Mother Nature’s worst at bay. ETI’s Snow Switch line of Snow & Ice Melt Sensors and Controllers offer the most technically advanced thermal...
by ETI Staff | Jun 24, 2020 | Controller, FPT 130 FAQs, GPT 130 FAQs, GPT 230 FAQs, TRACON
POWER LINE NOISE ISSUES WITH GROUND FAULT PROTECTION EQUIPMENT Due to the high sensitivity of ground-fault-current detection circuits, it is possible that excessive line noise on the power source wiring can cause an alarm. This can occur in the form of a ground-fault...
