NETCOM ADH NEMA

Automatic Air Dehydrator with Ethernet Communications for Outdoor & Mobile Applications

The ADH NETCOM automatic waveguide dehydrator supplies low pressure dry air to keep waveguide and coaxial cable dry. Output pressure is configurable between 0.10 psig and 7.50 psig (7mbar – 517mbar) in 0.01 psig (0.67mbar) increments. Factory default pressure is 0.5 psig (34.5mbar). Operational monitoring and alarms are software based making them highly configurable in the field. Future software features can be installed while in service over the internet or local Ethernet network.

  • Network-ready

FEATURES

  • Provides dry pressurized air to ensure signal quality of antenna waveguide and dielectric coaxial cable
  • Highly configurable to meet the needs of wide ranging applications
  • Programmable operating pressure range: 0.10 psig – 7.50 psig (7mbar – 517mbar)
  • Brushless compressor for long life
  • Future-proof software based features allow updates and upgrades while in service
  • Remote monitoring and control with web interface or SNMP
  • Configurable Master/Slave operation
  • Ethernet, RS-422/485, RS-232 and alarm relay outputs
  • Durable, light weight IP66, NEMA 4X enclosure
  • Designed to allow minimal flex without damaging enclosure or components for mobile and other high vibration applications
  • Optionally available with military style connectors
  • Low energy use minimizes operational costs

We're dedicated to our customers

From the front office to the production floor, we go above and beyond to help make your project successful.

We're dedicated to our customers

From the front office to the production floor, we go above and beyond to help make your project successful.

Share This