ETI TRACON – HEAT TRACE – HELPFUL TIPS
TRACON FAQ’S – FPT-130 CAN THE UNIT INTERFACE WITH BMS? CAN IT COMMUNICATE WITH BACNET OR MODBUS? No, the FPT 130 provides a summary alarm via a dry contact relay. This relay is energized whenever the unit is powered. So, with power off the NC contact is...NETCOM FAQS – ADH NETCOM
HOW CAN I CHANGE THE PRESSURE SETTINGS ON MY NETCOM? Establish communications with the dehydrator through the Ethernet interface (default IP address from the factory is 192.168.52.9) and navigate to the configuration page. Here you can change the low pressure alarm,...ETI IS GOING PAPERLESS
Why the change? In an effort to become more streamlined and to do our part for the environment, ETI is moving to a paperless system for all of our product Data Sheets, Installation Guides and Manuals. Moving forward, all of our product lines; Snow Switch, Tracon and...
Heat Trace with Plastic Pipes
Heat Trace with Plastic Pipes Heat cable can be used on plastic pipes but the plastic’s durability and thermal properties must be considered. Plastic has approximately 125 times the thermal resistance than steel but is also more susceptible to damage from direct high...
SNOW SWITCH FAQS – PD-PRO
WHY DO I HAVE A RED GFEP LIGHT ON? The GFEP indicator will come on when a ground fault occurs in one of the heater circuits. The insulating resistance of the heater cable is breaking down or the cable has been damaged allowing current to pass to ground thru an...
FREQUENTLY ASKED QUESTIONS – TRACON TEMPERATURE CONTROLLER
Temperature Controller – GPT-130 QUESTION – WHY AM I GETTING A GROUND FAULT WHEN THE GROUND FAULT CURRENT IS SO LOW? ANSWER – The GPT-130 displays a number of alarms, beside the ground...
ANTHONY MACRI NAMED ETI’S DIRECTOR OF ENGINEERING
TUESDAY, SEPTEMEBER 29, 2020 (SOUTH BEND, IN) The ETI Network of Companies (ETI, ETI Fab, and ETI Controls) is proud to announce the promotion of Anthony Macri to Director-Engineering. Anthony is a proven leader at ETI with over 5 years of experience as an Electrical...
September Is Sensor Placement Month At ETI
SENSOR PLACEMENT FOR SNOW & ICE MELT APPLICATIONS A great number of service calls come in with the common problem of the heaters not coming on even though it is snowing outside or there is ice buildup. After trouble- shooting the system it is discovered...