by ETI Staff | Jul 26, 2017 | NETCOM FAQs
If you are running windows 7 and can not communicate with the NETCOM you will need to enable the TFTP in the operating system. You do this through the control panel – add / Remove programs and then add/ remove windows...
by ETI Staff | Jul 26, 2017 | NETCOM FAQs
To access the NETCOM web pages properly, you need to have AJAX enabled on your browser. If using Internet Explorer: * Go to the tools menu, and select “Internet Options” * Select the “Advanced” tab. * Scroll down and find the...
by ETI Staff | Jul 26, 2017 | EDH-4 FAQs
No. The connector on the back of the EDH-4 unit is for use with external alarms only. The following table gives the function for each associated pin of the DB9...
by ETI Staff | Jul 26, 2017 | EDH-4 FAQs
The EDH-4 has five different error codes and they are as follows: EDH-4 Error Codes EDH-4 Error Codes Older Models Click here for more information about the EDH-4 Dehydrator including manuals. EDH-4...
by ETI Staff | Jul 26, 2017 | EDH-4 FAQs
Yes, you can regenerate desiccant start by emptying the desiccant into a clean baking dish. Bake desiccant at 350º for two hours, or until silica gel particles turn dark blue, in a conventional oven (do not use a microwave). After the silica gel particles have turned...
