Tracon GPT 130

single channel heat trace TEMPERATURE controller

The GPT 130 Temperature Controller is ideal for use in any electric heat application requiring a control system to maintain a steady temperature. With 2% accuracy span, built in 30 amp relay with a 30mA GFEP your application will be safely and reliably controlled. Any 100k ohms 3-wire RTD or Thermistor sensor can be used for temperature sensing.

Adjustable Temperature Setpoint and Alarms Sensor Inputs
Precision Monitoring and Control
Ground–Fault Equipment Protection
Automatic GFEP Circuit Self–Test

GPT-130-Data-Sheet

GPT-130-Manual

GPT-130-Installation-Guide

GPT 130 Quote, Please!

FEATURES

Adjustable temperature setpoint allows precise control of a wide range of processes
Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
Manual and Automatic self testing after commissioned
Isolated SPDT 1 AMP Class 2 contact for remote alarming on 5 conditions
Temperature display for accurate adjusting and monitoring
Load current display for accurate adjusting and monitoring

Ground fault current display for accurate monitoring, protection, and alarm
Adjustable alarm thresholds for excess ground fault current, load current, and temperature
Alarms indicated with panel display and relay contact for remote signaling
A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor failure
Fire Protection Mode maintains heater operation for use in critical fire protection systems
Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation

TRACON GPT 130 | SPECIFICATIONS

General
Approvals

Environmental
Area Of Use	Nonhazardous Locations
Operating Temperature Range	−40 °F to 131 °F (−40 °C to 55 °C)

Enclosure
Dimensions	8 1/8″ (W) x 5 1/2″ (H) x 4 3/8″ (D) 207 mm (W) x 140 mm (H) x 112 mm (D)
Ingress Protection	NEMA 4X, IP66
Cover Attachment	Polycarbonate cover, plastic screws
Cable Entries	Two liquid-tight cable glands installed for sensor and alarm leads, cable diameter 0.08” to 0.24” (2 mm to 6 mm) One 1.046″ hole to accommodate a ¾” conduit fitting for power wiring connection
Material	Polycarbonate
Weight	2.7 lb. (1.22 kg)
Mounting	Wall mount with flanges

Wiring Terminal Ratings
Power	Barrier Strip Terminals for Line, Neutral, and Ground; use 10 AWG wires rated for at least 194 °F (90 °C)
Sensors	Terminal Block, rising cage clamp, 12–28 AWG leads
Alarm Relay	Terminal Block, rising cage clamp, 12–28 AWG leads

User Interfaces
Pushbuttons	UP, DOWN, ENTER, TEST / RESET BACK
DIP Switches	RTD wiring configuration Panel lockout

Parameter Settings
Temperature Setpoint Heat ON	Adjustable −99.9 °F to 999 °F Adjustable −99.9 °F to 999 °F (−73.3 °C to 537.7 °C)
Temperature Setpoint Heat OFF	Adjustable −99.9 °F to 999 °F Adjustable −99.9 °F to 999 °F (−73.3 °C to 537.7 °C)
Low–Temperature Alarm Threshold	−99.9 °F to 999 °F (−73.3 °C to 537.7 °C) Default 35 °F (−1.7 °C)
Low–Temperature Alarm Delay	0 s to 3000 s Default 300 s
High–Temperature Alarm Threshold	−99.9 °F to 999 °F (−73.3 °C to 537.7 °C) Default 100 °F (37.8 °C)
High–Temperature Alarm Delay	0 s to 3000 s Default 300 s
Low–Current Alarm Threshold	0.0 A to 10.0 A Default 1.0 A
Low–Current Alarm Delay	0 s to 300 s Default 5 s
High–Current Alarm Threshold	0.0 A to 55.0 A Default 30.0 A
High–Current Alarm Delay	0 s to 600 s Default 300 s
Ground Fault Limit Current	1.0 mA to 300.0 mA Default 30 mA
Self–Test Interval	1 h to 250 h when enabled Default 24 h
Sensor Type	RTD or Thermistor
Temperature Unit	°F or °C Default °F

Indicators
Status Indicator	Power (Green) Heater (Yellow) Low Temperature (Blue) Summary Alarm (Red)
Display	2.7″ OLED graphic 128×64
Summary Alarm Relay Reporting	Low temperature High temperature Low load current High load current High ground fault current Stuck relay Sensor fault Internal fault
Control Ratings
Temperature Accuracy	+/− 2 °F (1 °C)
Temperature Sensors
Temperature Inputs	(Included) Thermistor: 100k ohms at 25 °C, range −40 °F to 230 °F (−40 °C to 110 °C), 20ft Lead (25076) RTD Sensor (sold Separately) : Platinum, Alpha = 0.00385, ITS–90, 100 ohms at 0 °C Input supports 3–wire connection Sensor operates at 1 mA
GFEP (Ground Fault Equipment Protection)
Operation	Continuously tests ground fault current whenever the load is on; also manually and periodically tests equipment ground fault current with each self–test.
Range	Adjustable 1 mA to 300 mA, Default 30 mA
Automatic Self Test	Verifies GFEP functionality every 24 hr. and whenever the load is energized
Power
Supply Voltage	100 – 277 V ac 50/60 Hz
Controller Power Consumption	5 W maximum, 2 W idle
Load Rating	30 A, 100 – 277 V ac resistive

ORDERING INFORMATION

Order Number	Description
25170	Tracon MODEL GPT 130 Single-Point General Purpose Heat–Trace Control
25076	Temperature Sensor (included)
25299	GPT 130 Installation Sheet
25166	GPT 130 Installation and Operation Manual