ADH NETCOM SOFTWARE, VERSION 2.19
ADH NETCOM Software, version 2.19 Changes in this update: This update is to reduce the odor that occurs during regeneration on new units. While the issue(s) fixed in this version will not affect all installations, it is recommended that all units in the field with...
MASON TRAN NAMED ETI’S MARKETING ASSOCIATE
MONDAY, JUNE 5, 2023 (WESTFIELD, IN) The ETI Network of Companies (ETI, ETI Fab, and ETI Controls) is proud to announce the hiring of Mason Tran for the Marketing Associate position and the continuation of top talent that broadens our global ability to expand support...
ETI Network of Companies Private Label Capabilities – Have a product idea in mind? We can build it for you!
For over 55 years, The ETI Network of Companies has been the premiere choice for OEMs seeking fully customizable private label solutions from a partner that has served customers reaching over 100 different countries. Our products branch out in various sectors...
Did You Know?
Did you Know? ETI Network has added two distinct manufacturing capabilities. ETI manufactures and assembles much more than electronic equipment! ETI Fab can fulfill your machining, fabricating, and welding needs. In 2019, Fab was founded in...
Robotic Multi-Station Weld Cell Acquisition Announcement
In an effort of improving safety, accuracy and repeatability, The ETI Network of Companies is proud to announce the latest acquisition of an OTC Daihen Robotic Multi-Station Weld Cell. With “Speed is Our Weapon”, the new Cell diversifies the types of steel, stainless...
ETI & ETI FAB Are Hiring!
ETI & ETI FAB ARE HIRINGPositions AvailableETI & ETI FAB are equal opportunity employers. We offer competitive wages and great benefits.ETI - SOUTH BEND, IN Firmware Engineer For more information, or to apply for these positions, please contact ETI & ETI...
What type of wire do I need to extend my lead length? Sensor vs. Thermistor
When installing ETI sensors and thermistors, you may find that you need to extend the leads greater than what’s already provided from the factory. Because the Snow Switch sensors operate at a higher voltage and use higher current than the thermistors, the recommended...
ETI TRACON – HEAT TRACE – HELPFUL TIPS
TRACON FAQ’S – FPT-130 CAN THE UNIT INTERFACE WITH BMS? CAN IT COMMUNICATE WITH BACNET OR MODBUS? No, the FPT 130 provides a summary alarm via a dry contact relay. This relay is energized whenever the unit is powered. So, with power off the NC contact is...
NETCOM FAQS – ADH NETCOM
HOW CAN I CHANGE THE PRESSURE SETTINGS ON MY NETCOM? Establish communications with the dehydrator through the Ethernet interface (default IP address from the factory is 192.168.52.9) and navigate to the configuration page. Here you can change the low pressure alarm,...
ETI IS GOING PAPERLESS
Why the change? In an effort to become more streamlined and to do our part for the environment, ETI is moving to a paperless system for all of our product Data Sheets, Installation Guides and Manuals. Moving forward, all of our product lines; Snow Switch, Tracon and...
Heat Trace with Plastic Pipes
Heat Trace with Plastic Pipes Heat cable can be used on plastic pipes but the plastic’s durability and thermal properties must be considered. Plastic has approximately 125 times the thermal resistance than steel but is also more susceptible to damage from direct high...
SNOW SWITCH FAQS – PD-PRO
WHY DO I HAVE A RED GFEP LIGHT ON? The GFEP indicator will come on when a ground fault occurs in one of the heater circuits. The insulating resistance of the heater cable is breaking down or the cable has been damaged allowing current to pass to ground thru an...
FREQUENTLY ASKED QUESTIONS – TRACON TEMPERATURE CONTROLLER
Temperature Controller - GPT-130 QUESTION - WHY AM I GETTING A GROUND FAULT WHEN THE GROUND FAULT CURRENT IS SO LOW? ANSWER - The GPT-130 displays a number of alarms, beside the ground fault it will also...
ETI IS HIRING – PARTS & SERVICE SPECIALIST / CUSTOMER SERVICE
ETI SOUTH BEND IS HIRINGPosition AvailableETI is an equal opportunity employers. We offer competitive wages and great benefits.ETI - SOUTH BEND, IN Parts & Service Specialist / Customer Service For more information, or to apply for these positions, please contact...
ANTHONY MACRI NAMED ETI’S DIRECTOR OF ENGINEERING
TUESDAY, SEPTEMEBER 29, 2020 (SOUTH BEND, IN) The ETI Network of Companies (ETI, ETI Fab, and ETI Controls) is proud to announce the promotion of Anthony Macri to Director-Engineering. Anthony is a proven leader at ETI with over 5 years of experience as an Electrical...