The NETCOM dehydrator can communicate via Ethernet, RS422, and RS232. The Ethernet interface provides the best communications and control of the dehydrator by providing a web based interface. Through this interface, you can monitor the system, change the IP address, communications interface parameters, pressure and alarm settings. The default IP address from the factory is

You can reset the unit to the factory default IP by turning off the power, pressing the reset button on the back under the Ethernet connection. Continue to press the reset as you turn on the power and wait about 5 seconds before releasing the reset.

The RS422 and RS232 can be used to monitor the system but has limited command capabilities’. Click here for more information about the ADHNetcom Dehydrator including manuals.

ADH Netcom dehydrator