Tracon FPT 130
single channel heat trace TEMPERATURE controller
The FPT Controller is a single channel temperature controller with up to 5 fixed set points. A universal power supply allows the FPT 130 to operate from 100 Vac to 277 Vac and control resistive loads up to 30 amps with 30 mA ground fault protection. 100k ohms Thermistor can be used for temperature sensing. 100k ohms Thermistor can be used for temperature sensing.
- Adjustable Temperature Setpoint and Alarms Sensor Inputs
- Precision Monitoring and Control
- Ground–Fault Equipment Protection
- Automatic GFEP Circuit Self–Test
FEATURES
- Adjustable temperature set point of 30 °F, 38 °F, 45 °F, or 50 °F (−1.1 °C, 3.3 °C, 7.2 °C, or 10 °C) for various freeze protection applications
- Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
- Ground–Fault Equipment Protection with manual and automatic test function
- Alarms for excess ground fault current, low load current, and temperature
- Alarms indicated with panel LED lights and relay contact for remote signaling
- A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor fault
- Fire Protection Mode maintains heater operation for use in critical fire protection systems
- Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation
TRACON FPT 130 | SPECIFICATIONS
| General | |
| Approvals |  |
| Environmental | |
| Area Of Use | Non-hazardous Locations |
| Operating Temperature | −40 °F to 131 °F (−40 °C to 55 °C) |
| Enclosure | |
| Dimensions | 8 1/8″ (W) x 5 1/2″ (H) x 4 3/8″ (D) 207 mm (W) x 140 mm (H) x 112 mm (D) |
| Ingress Protection | NEMA 4X, IP66 |
| Cover Attachment | Polycarbonate cover, plastic screws |
| Cable Entries |
Two liquid-tight cable glands installed for sensor and alarm leads, cable diameter 0.08” to 0.24” (2 mm to 6 mm)
One 1.046″ hole to accommodate a ¾” conduit fitting for power wiring connection |
| Material | Polycarbonate |
| Weight | 2.7 lb. (1.22 kg) |
| Mounting | Wall mount with flanges |
| Wiring Connector Ratings | |
| Power | Barrier Strip Terminals for Line, Neutral, and Ground; use 10 AWG wires rated for at least 194 °F (90 °C) |
| Sensors | Terminal Block, rising cage clamp, 12–28 AWG leads |
| Alarm Relay | Terminal Block, rising cage clamp, 12–28 AWG leads |
| User Interfaces | |
| Pushbutton | TEST/RESET |
| DIP Switches | Temperature setpoint Thermistor fault mode Fire protection mode |
| Parameter Settings | |
| Temperature Setpoints | 30 °F, 38 °F, 45 °F, or 50 °F (−1.1 °C, 3.3 °C, 7.2 °C, or 10 °C) |
| Low–Temperature Threshold | 32 °F (0 °C) for 38 °F, 45 °F, or 50 °F (3.3 °C, 7.2 °C, or 10 °C) setpoints 28 °F (-2.2 °C) for 30 °F (-1.1 °C) setpoint |
| Low–Current Alarm Threshold | 0.1 A |
| Low–Current Alarm Delay | 5 s |
| Low-Current Alarm Threshold | 0.1 A |
| Ground Fault Limit Current | 30 mA |
| Self-Test Interval | 24 h |
| Indicators | |
| Status Indicator |
Power to the unit (Green solid) Calibration error (Green blinking) Call for heat (Yellow solid) Low current alarm (Yellow blinking) Stuck relay (Yellow blinking fast) Low temperature (Blue solid) High temperature (Blue fast blinking) Sensor fault (Blue blinking) Ground fault (Red solid) GFEP circuit failure (Red blinking) |
| Summary Alarm Relay Reporting |
Low load current High ground fault current Sensor fault Internal fault |
| Control Ratings | |
| Temperature Accuracy | +/− 2 °F (1 °C) |
| Temperature Sensors | |
| Temperature Input | (Included) Thermistor, 100k ohms at 25 °C, range −40 °F to 230 °F (−40 °C to 110 °C),(Included) Thermistor, 100k ohms at 25 °C, range −40 °F to 230 °F (−40 °C to 110 °C), 20ft Lead (25076) |
| GFEP (Ground Fault Equipment Protection) | |
| Threshold | 30 mA |
| Automatic Self–Test Range | Verifies GFEP functionality every 24 hr. and when the load is turned on |
| Power | |
| Supply Voltage | 100 – 277 V ac 50/60 Hz |
| Controller Power Consumption | 5 W maximum, 2 W idle |
| Load Rating | 30 A, 100 – 277 V ac resistive |
ORDERING INFORMATION
| Order Number | Description |
| 25169 | Tracon MODEL FPT 130 Single-Point Freeze Protection Heat–Trace Control |
| 25076 | Temperature Sensor (included) |
| 25298 | FPT 130 Installation Sheet |
| 25165 | FTP 130 Installation and Operation Manual |