Skip navigation

Press Release

April 24, 2009

End-of-Sale Announcement for the ADH–2A COM and ADH–3COM Automatic Air Dehydrators
The ADH–2A COM and ADH–3COM dehydrators are being replaced by the ADH NETCOM dehydrators which were launched April 2009.
Last day to order these ADH–2A COM and ADH–3COM models will be June 15, 2009.
Introduction

The ADH models of automatic air dehydrators have a successful history of delivering pressurized dry air for telecommunication antenna pressurization systems since 1986 and is considered one of Environmental Technology's premier product lines. This is evident with thousands of units in the field today and the number of units still in service since the product line's inception. Many of the first units shipped are still in service today more than 20 years later.

In 1991 Environmental Technology introduced the ADH–2COM and entered the world of network managed equipment. These units featured RS-422/485 networking and provided support for the Scientific-Atlanta protocol, terminal monitoring, Master-Slave configuration and redundant dehydrator pairs. Since that time the ADH–2COM, and later the ADH–2A COM and ADH–3COM, have been integrated into M&C systems through out the industry.

Today, Environmental Technology continues the evolution of the ADH product line with the introduction of the new ADH NETCOM automatic air dehydrator with Ethernet communication. The ADH NETCOM dehydrator pushes automatic air dehydrator technology to the next level with integral support for HTTP, SNMP, UDP and TFTP communications while maintaining legacy communications support. With a wide range of field configurable options the ADH NETCOM automatic air dehydrator is ideal for both new installations and as a direct replacement for in service dehydrators.

End-Of-Sale and End-of-Life Announcement

Environmental Technology announces the End of Sale (EoS)/End of Life (EoL) plan for the current ADH–2A COM and ADH–3COM model dehydrators. This includes the associated NEMA and DC models and all configuration variations.

Product Migration

The recommended replacement products are the Environmental Technology ADH NETCOM automatic air dehydrators. Customers are encouraged to migrate to the ADH NETCOM models, which meet or exceed the same performance specifications as the legacy ADH model dehydrators, but offer more in the way of configuration and communications. In direct comparison, the ADH NETCOM provide more value and functionality by providing the following:

  • Easier to order and deploy with less part number options and fully configurable in the field
  • A drop in replacement for previous ADH models in service and in specifications
  • Future-proof software based features allow updates and upgrades in the field; next generation features easily downloaded and added through-out the life time of the product
  • Remote monitoring and control expanded from previous models with a web interface and support for SNMP, UDP, TFTP and Scientific Atlanta protocol
  • Ethernet, RS-422/485, RS-232 and alarm relay outputs expands networking options
  • Simple, automatic power connections for 100-240VAC or ±20-75VDC
  • A smaller, lighter chassis is only 16 pounds (24 pounds for outdoor NEMA) and extends only 12.5” into rack mounting systems.
  • Standard indoor units can be configured for either rack and wall mounting. Rack mounted units can have mounting brackets installed at 0”, 2” 6” or 8” from front of unit
  • Product lifetime extended to 15+ years; including the compressor which features brushless motor and metallic inlet muffler instead of fiber filter

These new dehydrators ship ready to be configured for the customer's network and the specific operational parameters for their pressurization system.

Replacement Models
EoS Products Replacement Models

17696 ADH–2A COM rack mount
17839 ADH–2A COM, SA
17846 ADH–2A COM wall mount
17479 ADH–3COM rack mount
17845 ADH–3COM wall mount
19025 ADH–2A COM (SA-530837-002)

Note: Includes all pressure range options, display options and Master configuration. Includes 120VAC and 240VAC voltage configurations.

23437 ADH NETCOM Automatic Dehydrator, AC

19356 ADH–3COM 48VDC
23092 ADH–3COM 20-75 VDC (+/-)
23126 ADH–2A COM 20-75 VDC (+/-)

Note: Includes all pressure range options, display options and Master configuration. Includes 24VDC and 48VDC voltage configurations.

23242 ADH NETCOM Automatic Dehydrator, DC

17905 ADH–2A COM outdoor NEMA
18136 ADH–3COM outdoor NEMA
21979 ADH–2A COM NEMA COM
23005 ADH–3COM NEMA COM

Note: Includes all pressure range options, display options and Master configuration. Includes 120VAC and 240VAC voltage configurations.

23483 ADH NETCOM Automatic Dehydrator, NEMA, AC

Table 1. Replacement models for EoS product models

Milestone Description Date
End of Sale The last date to order the product from Environmental Technology. This product is no longer for sale. June 15, 2009
Last shipment date The last possible date that Environmental Technology ships the affected product. December 15, 2009
Product End of Life Date The last date to receive service and support for the product. After this date, all support services for the product are only available as long as service parts are obtainable. When necessary Environmental Technology will make a best effort to replace obsolete components with new replacement part assemblies. June 15, 2014

Table 2. Product support time lines

Continued Service and Warranty

End of Service (EoS) refers to the time when certain products are no longer available for new purchases; it does not apply to service and warranty programs. Environmental Technology will continue to support the listed products at least until the Product End of Life (EoL) date. Environmental Technology will always make a best effort to find replacements for any components that we can no longer obtain. Environmental Technology often provides service and support for 20+ year old products currently in the field but can not guarantee the availability of components for these unit indefinitely. Extended warranties are only valid for one additional year beyond the standard two-year warranty period and may only be purchased at the original time of sale.

For Additional Information

For more information about the ADH NETCOM and other Environmental Technology products, please contact your system integrator or an Environmental Technology customer service representative.

Environmental Technology, Inc.
1850 N Sheridan Street
South Bend, IN 46628
Phone: (800) 234-4239 or (574) 233-1202
Fax: (888) 234-4238 or (574) 233-2152
info@networketi.com

©1996 − 2009 Environmental Technology, Inc.