DESCRIPTION

The patent pending computerized FWT–3 assures comfort with minimum energy cost by automatically controlling electric radiant floor heaters. The Digital Anticipation feature provides superior temperature regulation when compared to conventional thermostats. The FWT–3 continuously learns how best to control heating to maximize comfort by minimizing temperature variations.

The FWT–3 provides a simple analog adjustment for setting the floor temperature with a range of 50° to 95°F (10° to 35°C). Setting the adjustment fully counterclockwise inhibits heating which prevents energy waste by heating unoccupied areas. Status indicators show that power is present and the heaters are operating.

The low voltage NEC Class 2 FWT–3 derives its power from the external UL/CSA self-powered relay. The relay is mounted in a switch box installed at a convenient location. Only two wires connect the FWT–3 with the self-powered relay.

The temperature sensor is embedded in the floor substrate along with the heaters. This provides quick response and precise control. The 25' sensor cable plugs into the FWT–3 thus simplifying installation. Universally available telephone accessories can be used to extend the sensor cable length. A missing or shorted sensor inhibits heater operation.

Voltage options include 120, 208, 240 and 277 VAC. The relay controls heater loads up to 25 amps except at 277 VAC where the maximum load is reduced to 22 amps.

For complete information describing application, installation and features, please contact Customer Service or check on the web at www.networketi.com.